[3] DISASSEMBLY/ASSEMBLY
[3]-4. Armature
Fig. 11
DISASSEMBLING
ASSEMBLING
(1) Disassemble Armature as illustrated in Fig. 11.
Remove Holder cap and Carbon brush from the both side
of Housing.
And then separate Crank housing and Gear housing from
Housing set by removing four 4x50 Tapping screws.
Holder cap cover
Take the disassembling step in reverse. Refer to Fig. 12.
Crank housing
Brush holder cap
Pull off Armature from Housing set.
Remove Holder cap cover from Housing set
by levering up it with Slotted screwdriver.
Gear housing
Housing set
Carbon brush
Armature
P 6/ 9
R
epair