[3] DISASSEMBLY/ASSEMBLY
[3]-1. Center blade (cont.)
DISASSEMBLING
ASSEMBLING
Flat washer 5
Center blade
Pin 5
Center blade
Dust Cover
Fig. 2
Fig. 3
Fig. 4
Fig. 5
(2) Disassemble the shearing mechanism from Crank housing complete as illustrated in
Fig. 2
.
(3) Center blade can be disassembled from the Shearing mechanism as illustrated in
Fig. 3
.
(1) Assemble the Shearing mechanism as illustrated in
Figs. 4 and 5
.
Pin 7
Pay attention not to lose the above
washers when removing shearing
mechanism.
Remove four 4x50 Tapping
screws and separate Crank
housing complete.
Remove Stop ring E-4 from Pin 7.
And then remove Pin 7 toward the
opposite side of Stop ring E-4.
Remove the shearing mechanism
from Crank housing complete
by hand.
Stop ring E-4
a Thin washer 7
b Teflon washer 7
a
b
Shearing
mechanism
Dust cover (sponge made) has to be assembled
to Center blade as illustrated left.
Center blade
Center blade
Center blade
Dust cover
Dust cover
Dust cover
<Correct>
<Wrong>
Flat washer 5
Flat washer 5
Link
Pin 5
Pin 5
Link
Assemble Center blade and two
Flat washers to Link
as illustrated
left
.
P 3/ 9
R
epair
