[3] DISASSEMBLY/ASSEMBLY
[3]-1. Center blade (cont.)
ASSEMBLING
ASSEMBLING
Fig. 5
Fig. 6
Fig. 7
Dust cover
Note: Refer to Fig. 3
and assemble
the components.
Thin
Washer 7
Side blade R
Stop ring E-6
Pin 7
Pin 7
Pass Pin 7 through Crank housing
complete from Side blade R side
as illustrated above.
Secure the Pin 7 with
Stop ring E-4.
Teflon wsher 7
Center Blade
Set Thin washer 7 to the both side
of Center blade.
Set Teflon washer 7 to the outside
of Thin washer 7 as illustrated above.
Crank housing
complete
(2) Mount the assembled Shearing mechanism to Crank housing complete as illustrated in Figs. 5 and 6.
And, assemble the Crank housing complete to Housing set. Refer to the right illustration in Fig. 2.
Crank housing complete
Stop Ring E-4
[3]-2. Side blade R, L
DISASSEMBLING
M5x10 Hex scket
countersunk screw
Remove M5x10 Hex Socket countersunk screw.
Side blade R, L can be removed.
Spacer is mounted between Side blade L and
Slip plate L.
Side blade R
Side blade L
Side blade section can be disassembled as illustrated in Fig. 7.
Referr to Fig. 7 and assemble Side blade section. Do not forget to assemble Spacer under the Side blade L.
Spacer
Slip plate L
Slip plate R
P 4/ 9
R
epair
