Stator
Terminal
Controller
Switch
Be careful not to put
Lead wires on this place.
W
iring diagram
Wiring in Housing L
Fig. D-4
Be careful not to put
Lead wires on these Ribs.
Be careful not to put
Connecting terminals
under or on Capacitor.
Printed wiring
board
Boss
Capacitor
Rib A
Rib D
Rib B
Projection
of Controller
Be careful not to put Lead wires
on Ribs A, B and D.
Connecting terminals
Be careful not to put
Lead wires on this Boss.
Put the slack portion of Lead wires
of Stator and those of Printed wiring
board in this place.
Put one or more Lead wires
of Stator into both Lead wire
holders.
Route Lead wires of Circuit
board and those of Stator
between Rib A and Boss.
Fix Lead wires of Stator and
those of Circuit board in the
bottom of either Lead wire
holders.
Housing L
Controller
Terminal
projection
of Controller
While routing Lead wires connecting to Terminal
over the projection of Controller, assemble Controller
and Terminal to Housing L.
P 1
0
/ 1
1
