W
iring diagram for 9237C
Wiring from Motor housing set
P 1
0
/
1
4
Name plate
Field lead wire (black)
Field lead wire (black) and Brush holder’s lead wire (orange) are passed through
the right bottom opening of Name plate side.
Grounding lead wire (green) has to be routed from the center bottom opening.
Grounding lead wire (green)
Brush holder’s lead wire (orange)
5
4
3
Fasten the terminals with M4x8
Pan head screws while facing
the flat side to Terminal block.
Note
: Do not bent the terminals.
Connect the receptacles of Controller’s lead wires to Switch terminals
so that Lead wires come to the reverse side of Lock button.
And tilt the connected receptacles as drawn to the left.
Lock button
Terminal block
[Handle set R side]
Wiring to Switch’s Terminals
Wiring to Terminal block
Fig. D-2
Fig. D-3
Fig. D-4
1
flat side
flat side
[Strain relief side]
Symbol of grounding
Assemble Terminal block to
Handle set (R) while facing
the symbol of grounding
to Strain relief side.
Receptacle covered with tube
has to be connected to the
terminal on Lock button side.
Connect Receptacles to Switch terminals 1
while facing the connecting area of Lead wires
to the reverse side of Switch trigger.
Switch trigger
