Motor housing set
P
3
/ 1
4
Fig. 2
[3] DISASSEMBLY/ASSEMBLY
[3] -1 Armature
DISASSEMBLING
Loop handle
4x12 Tapping screw (2 pcs.)
(1) Separate Gear housing and Armature entirety from Motor housing set as drawn in
Fig. 2
.
Note
: Without removing Handle L, Stop ring E-6 on Armature rear side, and Magnet sleeve on Armature rear side,
it is impossible to pull out Armature from Motor housing.
1. Remove Carbon brushes, Pad 165 and
Loop handle or Grip 36 from the machine.
4. Unscrew four 5x35 Tapping screws from
the machine.
Note for 9237C only:
Unscrew M4x8 Pan head screw to remove
Lead unit in this step.
5. Pull out Gear housing and Armature from
Motor housing set.
And unscrew four 4x16 Tapping screws
from Gear housing complete.
3. Remove Stop ring E-6 and Magnet sleeve from
Armature shaft end while shifting Controller.
2. Remove Head cover by unscrewing two 4x12
Tapping screws. And remove Handle set L
by unscrewing four 4x18 Tapping screws.
6. Remove Bearing box from Gear housing complete.
Pad 165
Carbon brush
Carbon brush
R
epair
Grip 36
Stop ring E-6
Magnet sleeve
Controller
5x35 Tapping
screw (4 pcs.)
4x16 Tapping
screw (4 pcs.)
M4x8 Pan head screw (1 pc.)
Controller
Gear housing
complete
Gear housing complete
Armature
Bearing box
Handle set L
4x18 Tapping
screw (4 pcs.)
Head cover
Note
: No need to unscrew this
4x18 Tapping screw.
