Makita 5705R, Instruction Manual

Page: 5 / 56

5 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model 5705R 5903R 5103R 5143R
Blade diameter 190 mm 235 mm 270 mm 355 mm
Max. cutting depth at 90° 66 mm 85 mm 100 mm 130 mm
at 45° 46 mm 64 mm 73 mm 90 mm
No load speed (min
-1
) 4,800 4,500 3,800 2,700
Overall length 356 mm 400 mm 442 mm 607 mm
Net weight 5.4 kg 7.2 kg 9.3 kg 12.5 kg
Safety class
/II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Intended use
The tool is intended for performing lengthways and cross-
ways straight cuts and miter cuts with angles in wood while
in firm contact with the workpiece. With appropriate Makita
genuine saw blades, other materials can also be sawed.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
For public low-voltage distribution
systems of between 220 V and 250 V
For Model 5705R
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under unfavor -
able mains conditions can have adverse effects to the
operation of other equipment. With a mains impedance
equal or less than 0.37 Ohms it can be presumed that
there will be no negative effects. The mains socket used
for this device must be protected with a fuse or protective
circuit breaker having slow tripping characteristics.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-5:
Model 5705R
Sound pressure level (L
pA
) : 94 dB(A)
Sound power level (L
WA
) : 105 dB (A)
Uncertainty (K) : 3 dB(A)
Model 5903R
Sound pressure level (L
pA
) : 95 dB(A)
Sound power level (L
WA
) : 106 dB (A)
Uncertainty (K) : 3 dB(A)
Model 5103R
Sound pressure level (L
pA
) : 97 dB(A)
Sound power level (L
WA
) : 108 dB (A)
Uncertainty (K) : 3 dB(A)
Model 5143R
Sound pressure level (L
pA
) : 94 dB(A)
Sound power level (L
WA
) : 105 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter -
mined according to EN62841-2-5:
Model 5705R
Work mode: cutting wood
Vibration emission (a
h,W
) : 2.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model 5903R
Work mode: cutting wood
Vibration emission (a
h,W
) : 3.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: cutting metal
Vibration emission (a
h,M
) : 4.0 m/s
2
Uncertainty (K) : 1.5 m/s
2