R
epair
P 7 / 11
< 5 > Replacement of angular plate
Pan head screw M5
Hex lock nut M5x8
Angular
guide
Angular
plate
Fig. 9
Countersunk
head screw M5x12 x 4 pcs.
1. Remove pan head screw M5 and hex lock nut M5x8. And then remove 4 countersunk head screws M5x12
which fasten angular plate to the base.
2. So angular plate can be separated from base, together with angular guide
as illustrated in Fig. 10.
Fig. 10
Angular plate
Angular guide
3. Remove pan head screw M4x8 fastening lock plate, lever plate, lock plate, hex nut M8, 2 pcs. of flat washer 8
and cap square neck bolt M8x30 as illustrated in Fig. 11.
Pan head
screw M4x8
Lock plate
Lever plate
Hex nut M8
Flat washer 8
Cap square
neck bolt M8x30
Fig. 11