P 4 / 12
Depth guide
(Integrated parts of base plate)
Blade case
Cap square
neck bolt M8 x 24
Fat washer 12
Fat washer 8
Lever plate
Lock plate
Pan head
screw M4 x 8
Hex nut M8
View from cord guard
installing side
R
epair
( 3 ) Assemble new base plate to the saw unit by fastening angular guide with 4 pcs. of countersunk head screws
M5 x 12 as illustrated in Fig. 4.
Assemble cap square neck bolt M8 x 24 by screwing it from the inside of blade case through the depth guide.
See Fig. 4 A.
Attach flat washer 12, flat washer 8, lever plate and hex nut M8 to the cap square neck bolt.
Fasten hex nut M8 with lock plate in order to fix flat washer 12, flat washer 8 and lock lever. See Fig. 4 A.
Assemble lock plate to lock lever with pan head screw M4 x 8. See Fig. 4 A.
Angular guide
Base plate
Countersunk head
screw M5 x 12
Fig. 4 A
Fig. 4
< Note in assembling >
Lever plate has to be so adjusted that it can be positioned in the area of 0° - 20° as illustrated in Fig. 4 B, when the
cutting depth is adjusted to the maximum level.
Fasten lock lever on lever plate with
pan head screw M4 x 8, when lever plate
is locked with keeping 0° - 20° in angle
at the maximum cutting depth.
tighten or loosen hex nut M8
for adjusting.
Lever plate
Depth guide
0° - 20°
Fig. 4 B
