P 6 / 12
R
epair
( 2 ) Take off 3 pcs. of pan head screws M5 x 50, then motor housing can be separated from blade case as illustrated in
Fig. 7.
Armature can be separated from motor housing together with shaft lock as illustrated in Fig. 7 A.
( 3 ) Take the following step for assembling new armature.
Fig. 7 A, Fig. 7, Fig. 6 A, Fig. 6, Fig. 5
Pan head screw M5 x 50
Fig. 7
Motor housing
Armature
Fig. 7 A
Armature
Shaft lock
< Note in assembling >
Pay attention to the assembling direction of shaft lock, when assembling armature together with it.
See Fig. 8.
This portion has to be
faced to the front grip side.
Front grip
Fig. 8
Tapping screws 4 x 18
Light unit
Handle cover
( 4 ) Take off 3 pcs. of tapping screws, and disassemble handle cover. So, light unit can be replaced
as illustrated in Fig. 9.
Fig. 9
