R
epair
P 2 / 14
Apply Makita grease FA. No.2 to the portions marked with black triangle, and machine oil No.120 to the portions marked
with gray triangle to protect parts and product from unusual abrasion.
Linear guide
Linear guides
Balance plate
Balance plate
Gear complete
Push plate
Retainer
Push plate
Retainer
Slider
Crank complete
Pins of Gear housing cover
for supporting Balance plate
Push pin
Push pin
Blade holder
Gear housing
Needle bearing 407
M4x12 Hex. socket head bolt
(two pcs in total): See Note below.
Note: When removing two M4x12 Hex. socket head bolts illustrated above, put the appropriate amount of Loctite
241/242 or ThreeBond 1321/1342 on the thread of the screws and then fasten them.
Gear housing
Description
Item (Code No.)
Portion to lubricate
Makita grease FA. No.2
(042025-8A: 2.5kg)
Inside of Gear room
The pins which supports Balance plate.
The portion where contacts Gear complete.
The portion where contacts Retainer.
The portion where contacts Push plate.
The portion where contacts Slider.
The portion where contacts Dust seal.
Slider
The portion where contacts Needle bearing 407.
The hole where Rod reciprocates.
Gear housing cover
Gear housing cover
Its whole part
Machine oil No.120
Rod
Rod
Ratchet head 9.5 (for 1R219)
Round bar for arbor 6-100
Retaining ring pliers with long bent nails
1/4" Hex. shank bit M4 for Hex. socket head bolt
1/4" Hex.shank bit for M4
Bearing setting pipe 16-8.2
Description
Code No.
Use for
1R026
1R235
Inserting Self lock 6
Removing/ Installing Retaining ring S-8 in Crank housing
Replacing Ball bearings
Securing Crank
134873-0
Removing/ Installing Retaining ring R-18
Fastening M4x12 Hex. socket head bolts
Socket adapter (for 1R219)
Retaining ring S and R pliers
Torque wrench shaft 2-6N.m
Bit adapter ass'y
1R291
1R311
1R014
1R220
1R222
1R228
1R254
134873-0
1R269
Bearing extractor
CAUTION: Unplug the tool and remove the jig saw blade for the safety before maintenance !
[1] Lubrication
