R
epair P 5 / 14
The rolling portion has to be
faced to gear housing side.
Gear housing cover.
Leaf spring
2. Put leaf spring in gear housing cover, paying attention to its assembling direction as illustrated in Fig. 7.
And insert rod into gear housing cover, paying attention to the direction of hook of blade holder
as illustrated in Fig. 7A.
3. Align the hole of slider and the same of rod, and insert pin 4 into the aligned holes from left side as illustrated
in Fig. 8.
Stand slider and insert a pair of linear guide as illustrated in Fig. 8A.
4. Lifting up leaf spring, lay a pair of linear guide in order to position leaf spring on linear guides as illustrated
in Fig. 9.
And push slider to the center of linear guides. Fasten linear guides with 4 pcs. of pan head screws
M4 x 10 as illustrated in Fig. 9A.
1. Assemble tool opener to gear housing cover with referring to Fig. 1A and Fig. 2 at page 3.
< 6 > Assembling gear housing cover section
Gear housing side
Tool opener
Rod
Rod
Rod
Blade
holder
Fig. 7
Fig. 7A
Blade holder's hook
Blade holder's hook has
to contact with tool opener,
when detaching the blade
with tool opener.
Blade holder
Gear housing cover
Tool opener
Pin 4
(Insert it from left side.)
Slider
Slider
Slider, stood for setting
a pair of linear guide
Fig. 8
Fig. 8A
Rod inserted into
gear housing cover
Linear guides
Slider
Lift up leaf spring.
Lay linear guides.
Leaf spring
Linear guide
Slider
Fig. 9
Push slider to the
center of linear guides.
Pan head screws M4x10
Fig. 9A
