R
epair P 6 / 14
Stop ring E-3
Pin 4
Rod
5. Assemble stop ring E-3 to pin 4 as illustrated in Fig. 10.
Check, whether slider can reciprocate on linear guide smoothly, or not.
If slider does not reciprocate smoothly, incorrectly assembled linear guides can interfere with slider
in reciprocating. Try again to assemble linear guides correctly.
6. Lubricate the parts assembled in gear housing cover with referring to "< 1 > Lubrication " at page 2.
7. Aligning slider to needle bearing 407 on crank complete, assemble gear housing cover section to gear housing
as illustrated in Fig. 11. Do not forget to assemble packing between gear housing cover and gear housing.
See Fig. 11A.
Fig. 10
Slider
Linear guide
4341T, 4341CT, 4341FCT
4 pcs. of
Tapping screws CT 4 x 16
Safety wire
Gear housing cover
Packing
Crank complete
Balance plate
Needle bearing 407
Slider
Gear housing
Align slider to needle bearing 407
on crank complete
Gear housing
cover
Fig. 11
Fig. 11A
