![background image](http://html.mh-extra.com/html/makita/0088381066082/0088381066082_instruction-manual_230886006.webp)
6
ENGLISH
(Original instructions)
Explanation of general view
1
Switch trigger
2
Switch lever
3
Adjusting dial
4
Change lever
5
Pointer
6
Lock button
7
Power-ON indicator lamp
(green)
8
Service indicator lamp (red)
9
Side handle
10
Clamp nut
11
Side grip
12
Bit shank
13
Bit grease
14
Bit
15
Chuck cover
16
Depth gauge
17
Clamp screw
18
Blow-out bulb
19
Screws
20 Connector
21 Black
22 White
23 Screw
24 Crank cap cover
25 Control plate
26 Screwdriver
27 Crank cap
28 Hammer grease
SPECIFICATIONS
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE044-1
Intended use
The tool is intended for hammer drilling in brick, concrete
and stone as well as for chiselling work.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
GEB007-7
ROTARY HAMMER SAFETY WARNINGS
1.
Wear ear protectors.
Exposure to noise can cause
hearing loss.
2.
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord.
Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
4.
Wear a hard hat (safety helmet), safety glasses
and/or face shield. Ordinary eye or sun glasses
are NOT safety glasses. It is also highly recom-
mended that you wear a dust mask and thickly
padded gloves.
5.
Be sure the bit is secured in place before opera-
tion.
6.
Under normal operation, the tool is designed to
produce vibration. The screws can come loose
easily, causing a breakdown or accident. Check
tightness of screws carefully before operation.
7.
In cold weather or when the tool has not been
used for a long time, let the tool warm up for a
while by operating it under no load. This will
loosen up the lubrication. Without proper warm
up, hammering operation is difficult.
8.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
9.
Hold the tool firmly with both hands.
10. Keep hands away from moving parts.
11. Do not leave the tool running. Operate the tool
only when hand-held.
Model
HR4001C
HR4010C
HR4011C
Capacities
Carbide-tipped bit
40 mm
Core bit
105 mm
No load speed (min
–1
)
235 – 480
Blows per minute
1,350 – 2,750
Overall length
468 mm
Net weight
6.3 kg
6.7 kg
6.7 kg
Safety class
/II