Major MJ36-140, Operator'S Manual And Parts List

Page: 35 / 48

www.major-equipment.com 31
27
12
61
52
62
27
61
52
64
36
44
18
20
18
54
40
69
38
D
ENSURE 'D' MOTOR USED
ENSURE CLUTCH AND MOTOR
ARE DIRECTION AS MARKED
**IMPORTANT INFORMATION FOR
MOUNTING MOTOR/CLUTCH**
ENSURE 22mm CUTT OFF SHAFT
ON 'THICK FLANGE' OF GBOX
DISC SPRING WASHER & STRONG LOCKTITE
USED TO HOLD GEAR TO MOTOR
TORQUE TO 180Nm
HOLE MUST BE TAPPED M10.
USE STARTER TAP SO GRUB
SCREW BOTTOMS OUT ON
THREADS.
IT SHOULD NOT BE TIGHT
ON GBOX SHAFT GROOVE.
INSERT M10 OVAL POINT GRUB SCREW
INTO EACH HOLE WITH LOCKTITE
MUST NOT BE TIGHT ON GBOX SHAFT
TO ALLOW FOR A LITTLE 'END FLOAT'
1/2 x 1 1/4 SKS
MJ36-140-LH (MJ36-140-BDGA-H) - Parts List
Item Part No. Description
Qty
1* 755-DCBLDHXFS-L 755 BLADE (Anti_Clk) 1
2* 755-DCBLDHXFS-R 755 BLADE (Clk) 1
3 MJ35-150-ROL01 MJ35-150 BODY ROLLER 1
4 MJ36-140-HDM01 VERGE MOWER MOTOR MOUNT 1
5 MJ36-140-SW01 STEEL WHEEL 1
6 MJ36-140-SW10-H STEEL WHEEL AXLE LH 1
7 MJ36-140-BD01-H 140 BODY (LH) 1
8 MJ36-140-GD01 140 FRONT GAURD 1
9 MJ36-140-HM01-H HUB MOUNT (LH) 1
10 MJ36-140-RPV01 ROLLER PIVOT ARM (RH) 1
11 MJ36-140-RPV01-H ROLLER PIVOT ARM (LH) 1
12 MJ36-140-UST01 140 UNDERSIDE TROUGH 1
13 0940B031001 304mm DRIVE 1
14* LF205T 6 SPLINE 'T' BOX (205.873) 1.47 2
15 49410 HITCH PIN DIA 25x195mm 1
16 5582 DIA 38.3-42mm INSERT 4
17 60CSD 60mm STAR DRIVE 2
18 WS699306 WS OVERRUN CLUTCH EFK65/14R 1
19 MJ36-140-GD11 REAR RUBBER FLAP 1
20 MJRC-137 DIA 90 RUBBER COUPLING 1
21 MJRC-23-40 23mm COUPLING 40 SHORE 2
22 MJ36-140-GD06 140 FRONT CLAMP 1
23 MJ36-140-GD07 140 FRONT RUBBER SKRT 1
24 MJ36-140-GD12 140 REAR CLAMP 1
25 MJ39-143-HDM31 HYD MOUNT FACE PLATE 1
26 8400RM-CV25 GUARD BASE MOUNT 1
27 MJ36-140-BD11 UNDERSIDE CLAMP PLATE 2
28 MJ36-140-CRV10 140 GBOX COVER 1
29 MJ36-140-DF01 REAR DEFLECTOR (RH) 1
30 MJ36-140-DF01-H REAR DEFLECTOR (LH) 1
31 MJ36-140-GD10 140 REAR GAURD 1
32 MJ36-140-HDM05 HYD MOUNT DECK SUPPORT 1
33 MJ36-140-HDM06 BASE PLATE 1
34 8SM9-3 BLADE BACK SPACER 2
35 RM-RSN3 SHAFT COLLAR DIA 35 2
36 030W0MD80E564XD0R HYD MOTOR 80cc CLOCKWISE 1
37 111044 DIA 26-30mm INSERT 8
38 1/2hex10.9 1/2HEX10.9 28
39 12x112FSKS 1/2"x1 1/2" FINE SOCKET HEAD 12.9 16
40 12x114SKS 1/2"x1 1/4" FINE SOCKET HEAD 12.9 6
41 12x134FSKS 1/2"x1 3/4" FINE SOCKET HEAD 12.9 2
42 12x2FSKS 1/2"x2" FINE SOCKET HEAD 12.9 4
43 190592 PTO HAT 1
44 4410017 SPLINE GEAR 20T 1:8 1
45 5/8F 5/8" FINE NYLOC NUT 8
46 58x2FBZP 5/8"x2" FINE BOLT 8
47 AN099/10 LINCH PIN DIA 9.5 1
48 CP176-181MG1 45mm INSERT 3
49 CW39174 DISC SPRING 39x17x4 (YELLOW) 4
50 FWM12 M12 FLAT WASHER 53
51 FWM12XL M12 FLAT WASHER (EX-LARGE) 4
52 FWM16 M16 FLAT WASHER 63
53 FWM8 M8 FLAT WASHER 4
54 M10X10GSO M10x10 GRUB SCREW OVAL POINT 2
55 M12 M12 NYLOC NUT 39
56 M12x20SZP M12x20 SET BOLT 4
57 M12x25SKS M12x25 SOCKET HEAD SCREW 8
58 M12x30SZP M12x30 SET BOLT 2
59 M12x35BZP M12x35 BOLT 21
60 M12x40BZP M12x40 BOLT 8
61 M16 M16 NYLOC NUT 33
62 M16x35SZP M16x35 SET BOLT 8
63 M16x40SKBH M16x40 SOCKET BUTTON HEAD 10.9 7
64 M16x40SZP M16x40 SET BOLT 14
65 M16x50BZP M16x50 BOLT 2
66 M16x60BZP M16x60 BOLT 2
67 M8x12SKS M8x12mm SOCKET HEAD 12.9 2
68 M8x16SZP M8x16 SET BOLT 4
69 NL12SP M12 SP NORDLOCK 32
* - further breakdown provided