Major MJ36-140, Operator'S Manual And Parts List

Page: 33 / 48

www.major-equipment.com 29
28
12
28
61
52
64
62
52
61
1/2 x 1 1/4 SKS
HOLE MUST BE TAPPED M10
USE STARTER TAP SO
GRUB SCREW BOTTOMS
OUT ON THREADS - SHOULD
NOT BE TIGHT ON GBOX SHAFT
GROOVE
INSERT M10 GRUB SCREW
INTO EACH HOLE WITH LOCKTITE
MUST NOT BE TIGHT ON GBOX SHAFT
TO ALLOW FOR A LITTLE 'END FLOAT'
THIS PLATE MUST BE
MOUNTED ON GBOX FIRST
THEN REMAINDER OF
CLUTCH ASSEMBLED
DISC SPRING WASHER & STRONG LOCKTITE
USED TO HOLD GEAR TO MOTOR
TORQUE TO 180N/m
S
ENSURE "S" MOTOR USED.
ENSURE CLUTCH AND MOTOR
ARE DIRECTION AS MARKED
36
44
18
**IMPORTANT INFORMATION FOR
MOUNTING MOTOR/CLUTCH**
ENSURE 22mm CUT OFF SHAFT
ON 'THICK FLANGE' SIDE OF GBOX
54
40
20
69
38
MJ36-210-RH (MJ36-210-BDGA) - Parts List
Item Part No. Description
Qty
1* 755-DCBLDHXFS-L 755 BLADE (Anti_Clk) 1
2* 755-DCBLDHXFS-R 755 BLADE (Clk) 2
3 MJ36-140-HDM01 VERGE MOWER MOTOR MOUNT 1
4 MJ36-140-SW01 STEEL WHEEL 1
5 MJ36-140-SW10 STEEL WHEEL AXLE RH 1
6 MJ36-210-ROL 210 VERGE MOWER ROLLER 1
7 MJ36-140-HM01 HUB MOUNT (RH) 1
8 MJ36-140-RPV01 ROLLER PIVOT ARM (RH) 1
9 MJ36-140-RPV01-H ROLLER PIVOT ARM (LH) 1
10 MJ36-210-BD01 210 BODY RH 1
11 MJ36-210-GD01 210 FRONT GAURD 1
12 MJ36-210-UST01 210 UNDERSIDE TROUGH 1
13 0940B031001 304mm DRIVE 2
14* LF205T 6 SPLINE 'T' BOX (205.873) 1.47 3
15 49410 HITCH PIN DIA 25x195mm 1
16 5582 DIA 38.3-42mm INSERT 4
17 60CSD 60mm STAR DRIVE 4
18 WS699302 WS OVERRUN CLUTCH EFK65/14L 1
19 MJ36-210-GD12 REAR RUBBER FLAP 1
20 MJRC-137 DIA 90 RUBBER COUPLING 1
21 MJRC-23-40 23mm COUPLING 40 SHORE 4
22 MJ36-140-HDM06 BASE PLATE 2
23 MJ36-210-GD05 FRONT RUBBER SKIRT 1
24 MJ36-210-GD06 210 FRONT CLAMP 1
25 MJ36-210-GD11 210 REAR RUBBER CLAMP 1
26 MJ39-143-HDM31 HYD MOUNT FACE PLATE 1
27 8400RM-CV25 GUARD BASE MOUNT 2
28 MJ36-140-BD11 UNDERSIDE CLAMP PLATE 2
29 MJ36-140-DF01 REAR DEFLECTOR (RH) 1
30 MJ36-140-DF01-H REAR DEFLECTOR (LH) 1
31 MJ36-140-HDM05 HYD MOUNT DECK SUPPORT 1
32 MJ36-210-CRV10 210 GBOX COVER 1
33 MJ36-210-GD10 210 REAR GUARD 1
34 8SM9-3 BLADE BACK SPACER 2
35 RM-RSN3 SHAFT COLLAR DIA 35 2
36 030W0MD80E564XS0R HYD MOTOR 80cc ANTI-CLOCKWISE 1
37 111044 DIA 26-30mm INSERT 10
38 1/2hex10.9 1/2HEX10.9 40
39 12x112FSKS 1/2"x1 1/2" FINE SOCKET HEAD 12.9 28
40 12x114SKS 1/2"x1 1/4" FINE SOCKET HEAD 12.9 6
41 12x134FSKS 1/2"x1 3/4" FINE SOCKET HEAD 12.9 2
42 12x2FSKS 1/2"x2" FINE SOCKET HEAD 12.9 4
43 190592 PTO HAT 1
44 4410017 SPLINE GEAR 20T 1:8 1
45 5/8F 5/8" FINE NYLOC NUT 12
46 58x2FBZP 5/8"x2" FINE BOLT 12
47 AN099/10 LINCH PIN DIA 9.5 1
48 CP176-181MG1 45mm INSERT 4
49 CW39174 DISC SPRING 39x17x4 (YELLOW) 4
50 FWM12 M12 FLAT WASHER 59
51 FWM12XL M12 FLAT WASHER (EX-LARGE) 6
52 FWM16 M16 FLAT WASHER 67
53 FWM8 M8 FLAT WASHER 4
54 M10X10GSO M10x10 GRUB SCREW OVAL POINT 2
55 M12 M12 NYLOC NUT 45
56 M12x20SZP M12x20 SET BOLT 6
57 M12x25SKS M12x25 SOCKET HEAD SCREW 10
58 M12x30SZP M12x30 SET BOLT 4
59 M12x35BZP M12x35 BOLT 23
60 M12x40BZP M12x40 BOLT 8
61 M16 M16 NYLOC NUT 33
62 M16x35SZP M16x35 SET BOLT 8
63 M16x40SKBH M16x40 SOCKET BUTTON HEAD 10.9 7
64 M16x40SZP M16x40 SET BOLT 14
65 M16x50BZP M16x50 BOLT 2
66 M16x60BZP M16x60 BOLT 2
67 M8x12SKS M8x12mm SOCKET HEAD 12.9 2
68 M8x16SZP M8x16 SET BOLT 4
69 NL12SP M12 SP NORDLOCK 46
* - further breakdown provided