6
Version: 1.05, 05.10.18
3
Termination Switch
There is also a switch for each input ("TERMINATION"), which allows the
user to simply connect the terminating resistor (120 Ohm in position I on
the right) required at the end of a DMX line. However, if the respective
signal line runs further from the "THRU" output socket to downstream
devices, the switch must be set to position 0 (left).
Summary of Contents for 4001733
Page 1: ...Major DMX Merger 3in1 User Manual...
Page 16: ...16 Version 1 05 05 10 18...
