4.20. Non-Contact AC Voltage Detector (100 to 1000V AC)
• The non-contact voltage detector
operates when the meter is set to
any measuring function.
• The detector does not operate
when Auto Power Off turns the
meter off or when the rotary
function switch is set to the off
position.
• Slowly move the detector probe
closer to the conductor being
tested.
• If AC voltage within the specified
range is present, the indicator
light will illuminate.
4.18. Relative Values
• REL key can be used as the “
ZERO
” function of DC
current as well as relative value measurement of
other functions.
• Hold down the
HOLD/REL
key to enter REL
function.
• Hold down this key to quit REL.
4.19. Capturing Peak Values
• To activate the peak mode, press the “ ” key.
• If the Meter is already in the peak function, press
“ ” to turn off the peak mode.
WARNING:
Risk of Electrocution, before use, always test the Voltage
Detector on a known live circuit to verify proper operation.
WARNING:
Insulation type and thickness, distance from the source, and
other factors may effect operation, always verify live voltage using other
methods before working on electrical circuits.
25