5.3. Using the Clamp Meter with the
Thermal Imager
On IR+Clamp Meter mode, MODE key, RANGE
key, HOLD key and REL Function is the same in
Clamp Meter mode.
5.3.1. Capturing MAX/MIN Values on
IR+Clamp Meter Mode
1. To activate the maximum in mode, press the
“ ” key to display the max value.
2. If the Meter is already in the maximum
function, then press the “ ” key to display
the min value, then press the “ ” key to
display the current measurement value. Next
press “ ” key to return to the max value.
3. Press and hold the “ ” key for more than 1
second to turn the Meter off maximum.
28