9
Basic Operations
7 Press [Exit] key to exit the scanning.
6.2 Channel Scan
When entering to “Channel Scan” menu, a channel
scan menu will be shown as below:
1 There are two choices of “Scan Mode,” by
channel or by frequency.
If you scan by channel, “Scan Band” and “Ch No”
are available to be adjusted.
If you scan by frequency, “Frequency” and
“Bandwidth” are available to de adjusted.
2 There are two choices of “Scan Band,” “UHF” or
“VHF.”
3 There are 56 choices of “CH No” ranging from
In frequency “CH05(177500Hz) ” to “CH69(858000Hz).”
4 You can adjust any frequency to search by.
5 There are three choices of “Bandwidth”, 6, 7, and
8 MHz.
6 When you complete your modification, move
highlight to “Search” item and press [OK] key, then it
will begin to scan.
6.3 LCN
LCN: To toggle the LCN mode On/Off
When entering to “System Setup” menu, a menu will be
displayed as below:
7. System Setup
