8
Basic Operations
5.3 Delete All
Press [OK] key, it will pop up a warning message
to inquire you whether delete all services or not .
1 If the selection is “Yes”, all channels will be deleted.
2 If the selection is “No” or press [Exit] key, this
function will be ignored directly without saving.
Frequently asked Questions
Q: IF I recklessly delete all channels, what should I do?
A: There are two ways to restore:
To re-search all channels in “Installation” functions.
Use “load Factory setting” function to restore all
channels in “Tools” function.
6. Installation
When you enter the “Installation” menu, the menu
will be displayed as below:
1 Press [Up/Down] key to select menu pages among
Auto scan, Channel scan, Aerial adjustment, LCN.
2 Press [OK] or [Right] key to enter the “Installation”. If
Menu Lock is “On”, then a dialogue to inquiry the
password will be shown. The default Password is
“0000”.
3 Press [Up/ down] key to select menu items.
4 Press [Left] key or [Exit] key to go back to main
menu.
6.1 Auto Scan
When you enter to “Auto Scan” menu, there will display
the screen like below:
1 In “FTA only” item, press [Left/Right] key to turn
yes/no.
2 Moving the highlight to “Search” item and press [OK]
key to start scanning.
3 In the “Auto Scan” menu, press [Exit] key to draw
back from the scanning.
