12
Basic Operations
Press [up/down] key to select a timer, then press [OK]
key to open and adjust the timer menu.
7.5 Parental Lock
Press [OK] key on “Parental Lock” item, a dialogue
will be pop up to ask for the password (“0000” for
default.) Once the user make the password correct, a
screen will be shown as below.
1 Menu Lock: determining the users’ intention to block
the following menus with password: “Edit Channel/
Installation/Tools”.
2 Channel Lock: determining the users’ intention to
play or lock channels with password. If the setting is
“Yes”, then the password will be asked to play the
channels with lock mark.
3 New Password: used for revising password, by keying
in the new password in this item. After the 4 digital
numbers are filled, the Confirm Password item will ask
you to input the new password again. If the password is
correct, the screen will show up a message of “Saving
Data, Please Wait…” After finishing saving and drawing
back to “System Setup” menu, the revising is completed.
4 Press [Exit] key to draw back from the “Parental Lock”
menu.
7.6 OSD Setting
When entering the “OSD Setting” menu, a screen will be
shown as below:
1 OSD Timeout: set the duration of showing up for the
program banner which contains some information about
the channel and shows up once the channel is changed.
2 OSD Transparency: set the transparency of OSD.
Press [Left/Right] key to select the values.
There are 5 levels of transparency, 10%, 20%, 30%,
40%, and “Off” (Opaque of the OSD).
3 Load Default OSD Setting: press OK to restore default
OSD setting.
