3
Your machine, has a solution to every problem
We have put together here a few questions which may come to mind
when you start using your machine, you will see for yourself that your
new dryer can give a convincing and state of the art reply to all of
them.
The most important thing is for it to be perfectly level. This is why it
has adjustable feet (fig.1) so as to eliminate any imperfections in
the floor.
We would also advise you to place your dryer in such a way that
there is some space-even a fraction of an inch-all side.
(Fig.1)
First of all, remember to switch off the electricity. Then, to clean the body and any rubber
parts use a damp cloth and a little soap.
Avoid petrol or other solvents at all cost
s.
If this means that your dryer is going to stay unused for a long time,
then it would be best before you go to unplug it, close the water tap
and leave the door ajar so as to avoid any unpleasant odours
remaining inside. In fact, it is advisable to leave the door open
during periods of non-use as well.
If you are moving house, there is one simple but very important thing
you should do: Block the drum to save it from bumps, To do this, put
back the blocking screws that were removed when it was installed.
What to do if
1.What is the
best
position for my
dryer?
2.How shoulder I
clean my dryer?
3.Do I have to take
any particular
when I go on
holiday?
4.---And if I move
house?
Summary of Contents for MJ9200D
