Majestic MJ9200D, Technical Manual

Page: 15 / 19

15
5. Take out drying timer from control panel.
6 Pull out all terminals of wiring.
7. Change a new timer and connect terminals as follows:
Plug terminal No: TAA of wiring to “a” terminal of timer,
Plug terminal No: TAA1 of wiring to “a1” terminal of timer,
Plug terminal No: TAB of wiring to “b” terminal of timer,
Plug terminal No: TAB1 of wiring to “b1” terminal of timer,
Plug terminal No: TAC of wiring to “c1” terminal of timer,
Plug ground terminal (green) of wiring to ground terminal of timer,
8. Use two screws size M4x6 amount timer to control panel .
9. Test machine.
10. Amount top panel assembly.
11. Complete.