21
WMC Series Woodburning Fireplace
20000583
Model Number
Description
Component
(Chimney Components con't.)
Square Chase Termination
Square chimney cap used to terminate chimney
SLTS8
through chase. Includes adapter.
(Flashing material)
Adapter Kit
Required to unite 3-wall chimney with S20BR,
S20UB
S20BT, S20BW Traditional Top Housing
Chimney Support
Used to support the chimney at each 30' of
TCS8A
of vertical height above the hearth and
at every 6' of inclined chimney run.
Each support adds 2
¹⁄₂
" to chimney length.
Firestop
Required at each floor level and attic on
FS2A (8" straight flue)
multi-story installation.
FS6A (8" 30° inclined
flue)
Radiant Shield
Used as an alternate to FS2A firestop to
RS-8A
reduce the clearance from the chimney to
combustible framing. With 16" center lines.
Attic Insulation Shield
Used to prevent attic insulation from
FS2100-HT
(3-wall) (CF-11)
contacting the chimney system.
Canada
Chimney Collar Enclosure
Installs on the "over the chimney collar" of the
CCE-SK
(SK8)
fireplace; provides outside air to assist in cooling
the chimney system.
Attic Insulation Shield
Used to prevent insulation from coming in
AIS-SK
(SK8)
contact with the chimney system.
SK8 Chimney Sections
Used to build chimney systems exposed above
SK818CAN (1
¹⁄₂
' Long)
roof.
SK84CAN (4' Long)
45˚ Chimney Elbows
Provides 45˚ offset and return. For Canadian
SK845/2
installations only. For use with SK8 chimney only.
(Maximum use of 2, or 1 pair.)
Chimney Sections
Used to build chimney systems exposed above
8" flue
(3-wall)
roof.
818CAN (1
¹⁄₂
' Long)
84CAN (4' Long)
Attic Insulation Shield
Used to prevent attic insulation from
FS2100-HT
(3-wall) (CF-11)
contacting the chimney system.