21
BFC36 Balanced Flue Heat-Circulating Fireplace
7412647
Chimney Components
Component
Description
Model Number
Chimney Support
Used to support chimney for each of
TCS8A
30’ vertical height and 6’ of angled chimney run
(8” flue)
Firestop
Required at each floor level and attic on
FS2A (8” straight flue)
multi-story installation
FS6A (8” 30° inclined flue)
Attic Insulation Shield
Required in Canada
FS2100HT
Traditional Top Housing
Top housing of simulated brick pattern
T20B
available in red, tan or white. Appropriate
(single flue)
adapter is required (8CA). Flashing included.
TL20B
(extra tall single flue)
Housing Extension
Extends Traditional Top Housing on
202036
steep pitched roofs
(single flue)
Contemporary Chase Top
Used to terminate chimney at the top of a
Termination
chase. Flashing is not included.
TT200C
Adapter Kit (TT8CB) is required.
Chase Top Housing
Used with chase terminations to prevent rain entry.
FL88
(8” flue)
Contemporary Flashing
8-6-12 with 8” flue
Required for Contemporary Round Top
0 to 6/12 pitch
termination to prevent rain entry.
8-12-12 with 8” flue
(6/12 to 12/12 pitch)
Chimney Sections
8” flue
81 (1’ long)
Used to build chimney systems.
818 (1
¹⁄₂
’ long)
83 (3’ long)
84 (4’ long)
Chimney Elbows
Used to develop offset chimney systems.
Only 30° elbows are available. (Elbows
830A-2
packed 2 per carton - upper and lower
(8” 30° flue)
elbow set.)
Round Top Termination
Used to terminate chimney on the roof.
RT8C
Flashing not included.
(8” flue)
Extended Round Top Chase
Used to terminate chimney at the top of a
RT8CL
Termination
chase. Adapter Kit included. Flashing not
(8” flue)
included.
Adapter Kit
Required to connect triple-wall chimney
8CA
with Traditional Top Housing (T20B or TL20B)
(8” flue)
Adapter Kit
Required to unite chimney with
TT8CB
Contemporary Chase Top. (TT200C)
