MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch
- 10 -
Figure2-10 shows the rear panel of the MIGE3028-4GF-4S/M-20T.
Figure2-10 MIGE3028-4GF-4S/M-20T switch front panel
MIGE3028-4GF-8S / M-16T is a schematic view of the rear panel shown in
FIG2-11.
Figure2-11 MIGE3028-4GF-8S/M-16T switch front panel
MIGE3028-4GF -12S/ M-12T is a schematic view of the rear panel shown
in FIG 2-12.
Figure2-12 MIGE3028-4GF-12S/M-12T switch front panel
MIGE3028-4GF-16S / M-8T is a schematic view of the rear panel shown in
FIG.2-13.
Figure2-13 MIGE3028-4GF-16S/M-8T switch front panel
MIGE3028-4GF-24S rear panel/M schematic shown in FIG 2-14.
Figure 2-14 MIGE3028-4GF-24S/M switch front panel
For most industrial applications,19-inch rack mounting is very convenient
for them.Before installation you should check the installation of the
rack,including the following two elements:
If there is enough room to install this product?
If there is a power supply suitable for the work of this product?
When installing, first determine the installation position of the product,
align the hole on the rack with the mounting hole of the switch,and then fix it
with screws. The recommended size is M5×14.
2.2.3. Cable Connection
After the correct installation, the cable can be installed and connected,
mainly including the cable connection of the following interfaces.
Working interface
