MyPower S4100 Series Switch Install Manual (S4152F-POE-AC V2) V1.0
Maipu Confidential & Proprietary Information
Page 7 of 23
MyPower S4100 series switch fully supports DiffServ module. Each port
provides eight priority queues. User specifies a queue bandwidth on each
port. It supports WRR/SP/SWRR scheduling. Users deploy trusted CoS,
DSCP, IP priority and port priority. Users modify packet values of DSCP
and COS. The traffic can be classified by port, VLAN, DSCP, IP priority and
ACL table. The user modifies packet priority values of DSCP and IP. The
user specifies different bandwidths for voice/data/video to customize
different qualities of services.
l
Perfect network management
MyPower S4152F-POE-AC V2 routing switch supports SNMP, outband and
inband management, CLI and WEB interfaces, and RMON. It adopts SMTP
protocol to automatically send related sensitive information to the
Administrator. It supports SSH protocol to ensure the security of switch
configuration and management.
Appearance
Front Panel
1.
Front panel diagram
The front panel of MyPower S4152F-POE-AC V2 routing switch is as shown
in the following table. The four combo ports are formed by four SFP ports
and four RJ-45 ports.
Description for the front panel of MyPower S4152F-POE-AC V2 routing
switch:
Model
RJ-
45
Port
Combo
Port
CONSOLE
Port
POE
Button
LED
MyPower
S4152F-POE-
AC V2
44
4
One RJ-45
serial control
port
1
54 (48 port
indicators and six
system indicators)
The MyPower S4152F front panel provides 44 RJ-45 1000M electric ports,
four combo ports (four RJ-45 ports and four SFP ports), one console port
and 54 LEDs.
