MyPower S4100 Series Switch Install Manual (S4152F-POE-AC V2) V1.0
Maipu Confidential & Proprietary Information
Page 8 of 23
The front panel of MyPower S4152F routing switch is as follows:
2.
Console port description
MyPower S4152F-POE-AC V2 routing switch provides one RJ-45 serial
console port. With the interface, the user can complete the local or remote
configuration for the switch.
Console port supports the asynchronous mode. Set data bits as 8, stop
bits as 1 and parity check as none. By default, the supported baud rate is
9600bps.
Besides, console port supports the baud rate 14400, 19200, 38400, 57600,
and 115200(bps) in Bootrom mode, but the baud rate setting will become
invalid after restarting the switch.
Back Panel
The back panel of MyPower S4152F-POE-AC V2 includes one 220V AC
socket, one DC power (redundancy power, RPS) socket, one POE power
socket, one grounding terminal, and two 10G extended slots.
Back panel of MyPower S4152F-POE-AC V2
LEDs
The front panel of MyPower S4152F-POE-AC V2 has 54 indicators,
including port indicators, power indicators, DC power indicators, system
auto diagnosis check status indicator, POE status indicator, and 1/2 status
indicator of extended module. The meaning description is as follows:
The indicator description of MyPower S4152F-POE-AC V2 routing switch:
Indicator
Panel Label Status
Meaning
Power indicator
PWR
Green light
The internal power runs normally