MP2800 Series Router Install Manual V1.2
Maipu Confidential & Proprietary Information
Page 8 of 47
The router provides inbuilt and highly efficient hardware encryption
engine. The encrypting data does not occupy bandwidth and CPU of the
router system realizing that high-speed encryption does not affect data
forwarding efficiency. For widely-used IP private line, encrypting data
via WAN is the safest method of ensuring the security of important
data.
§
Each Ethernet port uses L2/L3 technology to realize flexible
support for services
All Ethernet interfaces of MP2800 support L2/L3 technology to realize
the control for different networking modes and services, avoiding poor
control capacity caused by using Layer-2 switch and the problem that
adopting routers occupies lots of IP addresses. In this way, we can
simplify network configuration and strengthen management and
control capacity of network for services.
§
§
High-density Ethernet port and asynchronous port to access
large-capacity Ethernet devices and traditional terminals
MP2816 and MP2818 models are configured with 2+24 100M Ethernet
ports to access network terminals, PC and video terminals. Users do
not need to purchase Ethernet switches, saving network investment
and reducing faults. Considering there are some dumb terminals to
access, MP2800 has extension slots which can be extended to up to 64
asynchronous interfaces to access traditional terminals and large-
capacity Ethernet devices in network nodes/branch offices.
§
Hierarchical QoS
The priorities of various services can be realized on specified
bandwidth of MSTP 100M port. MP2800 supports narrowband lines and
MSTP/MPLS broadband lines. For MSTP/MPLS, the lines are for 100M
interfaces, but in fact, the bandwidth applied by users is only a part
such as 2M, 5M, 10M, 20M and 50M. Inconsistency between interface
bandwidth and practical bandwidth results in traditional QoS becoming
invalid. S0 MP2800 router adopts hierarchical QoS on Ethernet ports to
realize bandwidth control first, and then secondary bandwidth
allocation for different services. The QoS service of MP2800 router
supports RSVP, CAR and queue policies such as FIFO, PQ, CQ, FQ,
CBWFQ and LLQ to ensure priorities of key services.
§
§
Supports MPLS and L2TPv3 to provide strict network area
division for a single line bearing multiple services
MP2800 supports MPLS, L2TP and IPsec, which can be used to deploy
VPN networks from Layer 2 to Layer 3. When branch offices are inter-
connected by various lines, multiple services can be born on a single
physical network to ensure the security and save cost.
§
Integrates routing, switching, security, voice, transmission,
storage and 3G
MP2800 integrates routing, switching, transmission, security, local
storage and 3G. The series leads ways of edge routers -
“
Faster, more
intelligent, more powerful
”
. The inbuilt intelligent switch, firewall, VPN
(including MPLS VPN, IPsec VPN and L2TP VPN), VoIP and transmission
文件使用
"pdfFactory Pro"
试用版本创建
(
www.fineprint.com.cn
