21
Mainstreet Equipment
User Manual
Model
P1
Undercounter -
541HTUC30
120s
Wash cycle times:
9.1.5.1 Thermo-stop
The thermo-stop is designed to ensure a constant rinse at the maximum temperature.
This means that the machine continues washing until the boiler reaches the ideal
temperature. Then the rinse cycle starts.
If the mains water temperature is less than 50 ºC / 122 ºF, the wash
capacity may be reduced.
9.1.6 Stopping the wash cycle and end of wash cycle
The wash cycle can be stopped or paused in the following ways:
• By pressing the active cycle button
→
the cycle stops completely.
• By opening the door
→
Cycle pauses. When the door is closed, the cycle continues.
• By switching off the machine
→
the cycle stops completely.
At the end of the wash cycle, remove the basket and leave the dishes to dry naturally. Remove
the dishes from the basket with clean hands, taking care not to burn yourself as the dishes are
extremely hot.
9.1.7 Drainage of the machine
The dishwashers have two types of drainage; gravity drainage or using a drainage pump,
which is optional.
9.1.7.1 Drainage by gravity
To drain the machine in this way first switch off the machine, then just remove the
overflow tube from the machine and it will drain naturally. For safety reasons, this
drainage method should only be used with the machine switched off.
• Switch off the machine. Press ON/OFF button for 2 seconds to turn unit OFF.
• Open the door and remove the filter tray. (Fig. 4)
• Remove the overflow tube. (Fig. 5)