16
Mainstreet Equipment
User Manual
8.6 Liquid rinse aid dispenser
Installation: Take the tube located in the back or your machine marked “Rinse Aid” and place inside rinse
container.
Tubes are transparent to make it visible that the chemicals are being dispensed.
Operation: This dispenser absorbs the rinse aid when it detects a loss in pressure during rinsing. That is, when
the filling solenoid valve closes, a vacuum is created that makes the rinse aid dispenser absorb the fluid to
which it is connected.
Adjustment: The dispenser should be adjusted when the machine is installed to ensure that the wash is
optimized from the start. The setting should be adjusted according to the type of rinse aid and the water
hardness.
WATER PRESSURE MUST BE MINIMUM 20 PSI AT THE PRESSURE GAUGE FOR THE RINSE AID DISPENSER
TO OPERATE PROPERLY.
Rinse Aid
Filter
Regulation
Rinse Line
8.7 Detergent dispenser
This machine must be operated with an automatic detergent feeder including a visual means to verify that
detergent is delivered or a visual or audible alarm to signal if detergent is not available for delivery to the
respective washing system. Please see instructions for electrical and plumbing connections located in this
manual and in the feeder equipment manual.
The detergent dispenser ensures that the correct measure of detergent is supplied to the machine.
Use ONLY Commercial Grade, High Temperature, Low Suds Liquid Detergent. Mainstreet Equipment
doesn’t recommend any specific brand name of chemicals. Contact your local chemical distributor for
questions concerning your chemical needs.
Installation: the detergent dispenser input is in the wash tank front part, above the maximum water level.
Take the tube located in the back or your machine marked “Detergent” and place inside detergent container.
Tubes are transparent to provide you visible means that chemicals are being dispensed.