26
The Pocket Surf
®
IV outputs the reading simultaneously that is currently appearing
on the display. Furthermore, after one reading is transmitted, the operator can send
readings from the other parameters by simply sliding the switch to another parameter,
H[HPSOL¿HGDVIURP5
a
to R
max
to R
z
.
The following are cables available for the Pocket Surf
®
IV:
86%2XWSXW&DEOH
Includes MarCom Standard Software
'LJLWDO2XWSXW
0DLQWHQDQFH 7URXEOHVKRRWLQJ
(continued)
3. Clean the probe skid and stylus
area.
4. Clean the bearing slot beneath the
Probe Mounting Block.
5. Replace the battery. Alkaline batter-
ies are only to be used.
5HSDLUV
If none of the above remedies work, and an
error message persists — particularly “E1”
or “E4”, contact Mahr Federal Inc. Ser-
vice Department for assistance and repair
information.
'RQRWGLVDVVHPEOHWKH3RFNHW6XUI
XQLWRUDWWHPSWDQ\IXUWKHUUHPHGLHVRU
repairs.
9LUWXDO&RP,QWHUIDFH'ULYHU
The Driver emulates for every connected cable an additional virtual COM-Port. The
application software communicates to the instrument in exactly the same manner as a
normal hardware COM-Port
