23
2SWLRQDO$FFHVVRULHV
($6%RWWRP3ODWH
When measuring workpiece sur-
faces with the Pocket Surf probe
in the “Closed” position, the EAS-
2584 Bottom Plate will accom-
modate cylindrical workpieces too
short (less than 3½"/89mm long)
to span the “V’s” on the bottom of
the Pocket Surf housing.
The Bottom Plate accommodates
cylindrical workpieces from
¼"/6.35mm diameter up to
1½"/38mm long — long enough to span
the slot lengthwise and sit securely in
the “V” of the Bottom Plate.
To install the Bottom Plate, remove the
Protective Cover from the Pocket Surf
unit and turn the Pocket Surf unit upside
down. Loosen the Clamping Screw on
the side of the Bottom Plate and posi-
tion the Bottom Plate over the base of
the Pocket Surf unit between the two
“V’s”. Tighten the Clamping Screw
¿Q
-
JHUWLJKWRQO\GRQRWRYHUWLJKWHQ
.
Minimum Length
