10
The Pocket Surf gage can be hand held or placed on a surface in any attitude;
it will operate in virtually any position — horizontally, vertically, at any angle in
between, even upside-down. In the “Closed” probe position, the gage can
PHDVXUHÀDWVXUIDFHVRUF\OLQGULFDOVXUIDFHV2'¶VGRZQWR
¼"/6.35mm in diameter. However, the workpiece or surface to
be measured must be at least 3½"/89mm long so that
it will span the two “V’s” on the bottom of the
Pocket Surf unit and rest securely
against them.
´&ORVHGµ3RVLWLRQ
For workpieces or surfaces less than 3½"/89mm long (too
short to span the “V’s”), use of EAS-2584 Bottom Plate (an
optional accessory) is recommended.
“Closed” Position
