Mahr Digimar 817 CLM, Operating Instructions Manual

Page: 115 / 152

115
Mahr GmbH • Digimar 817 CLM
The height measuring instrument can create statistical
evaluations based on stored data with the aid of
histograms, process control charts and pareto charts.
These results can via the internal USB memory be
sent to another data medium (PC) or be directly
printed on a USB printer.
8. Statistics
1. <-_______
2. Enter production data text
3. x-bar S/R charts configuration
4. Menu Histogram
5. Menu x-bar S-charts
6. Pareto chart menu
8.2 Enter and selecting production data
This menu describes how production data can be
entered
Up to 5 table names can be assigned and each table
has up to 49 rows for production data text. Table 6 is
normally only used for comments on the samples.
The production data entered are saved as comments
together with any measured size.
The production data can be used later as selection
criteria for the evaluation of statistics.
Select data :
Use the left and right arrow keys to skip to the next
table.
If a table is marked, use the up and down arrow keys to
active and select a production data text (1-49).
Select the comment number 0 of a table, if in this table
no production data text is to be saved.
With the comment number 0, the field with the
„Production data “ will show „Ignore“.
Finally press the ON/OFF key, to confirm selection and
also to leave this menu.
ON
OFF
TABLE NAME No. PROD DATA TEXT
MACHINE 5 TESTING
OPERATOR 2 BROWN
SHIFT 2 S2
TOOL 2 MEDIUM
CUSTOMER 2 BB
SAMPLE COMM 2 Q2
1. <-_______
2. Enter production data text
3. x-bar S/R charts configuration
4. Menu Histogram
5. Menu x-bar S-charts
6. Pareto chart menu
0 NOIBN
0 NOIBN
0 NOIBN
Sample comment 2 Q2
Enter prod. data text: