H O R E C A | G A S T R O G R I N D E R
8
5.3 electrical installation
Protect your device with separate pre-fuse (not
included in the scope of delivery) according to
the information provided under point 2 „Tech-
nical Data“.
make sure that the pre-fuse is not overloaded by
other devices (e.g. fan heaters, deep freezers).
Check whether the main voltage and frequen-
cy correspond to the information on the rating
plate.
Insert the plug into the corresponding grounded outlet.
5.4 adjustment of the portafilter rest
The grinder is designed so that most off different portafilter from
various espresso machines fit into the rest, item 12, for hands-
free grinding operation.
Proceed as follows for the adjusting the portafilter rest, item12:
• Keep the grinder switched off.
Slightly loosen the screws, item 13, with a allen wrench 3mm, in
case of 100-120v-model with a screwdriver and pull down the
portafilter rest, item 12.
In case the portafilter rest does not fit to your espresso ma-
chine´s portafilter, please contact your local dealer. he will ar-
range a different portafilter rest.
Push the portafilter of your espresso machine onto the start /
stop switch between the portafilter mounting and the portafilter
rest.
Now push up the portafilter rest until the portafilter holds on its
own. Refasten the screws, item 13.
6. Operation
Only use the PEAK espresso grinder for whole roasted coffee
beans. See chapter 1.3.
Observe the safety instructions under 1.2!
The max. permissible operating cycle is 5sec ON and 10sec OFF,
i.e. four double shots per minute - if you operate with fans (switch
position II, item 17, according to the information under point 2
„Technical Data“. Do not exceed the maximum allowable contin-
uous grinding time of 20 minutes. Afterwards, allow the grinder
to cool down before next operation.
