H O R E C A | G A S T R O G R I N D E R
14
Defect
The grinder hums
but does not grind.
The grinder does
not grind, the dis-
play is lit, single cup
is pre-selected
7. OPeRaTInG faUlTS
Cause
The spout is
clogged.
Grinding is set too
fine.
A foreign object
is in the grinding
mechanism.
The grinding time
is set to 0.
Remedy
Set grinding fineness to
“coarse” and trigger the
grinding process. The grind-
er will then grind itself free.
Afterwards, return the set-
ting to the desired grinding
fineness.
Turn the grinding fine-
ness setting to the right,
to “coarse”, and trigger the
grinding process. The grind-
er will then grind itself free.
Afterwards, return the set-
ting to the desired grinding
fineness.
Clean the grinding mecha-
nism as described and re-
move the foreign object.
Observe the safety instruc-
tions!
Reset the grinding time.
Defect
The grinder does
not start, the dis-
play is not lit.
In the case of other malfunctions or continued faults, please contact
your dealer or your authorised customer service centre.
Cause
The main plug is
not inserted.
The overload cir-
cuit breaker has
been tripped.
The pre-fuse has
tripped.
Remedy
Insert the main plug into
the socket.
Check to determine wheth-
er the trip button of the
circuit breaker has jumped
out. Press the trip button
in again if appropriate. If
the circuit breaker trips re-
peatedly, contact your au-
thorised customer service
centre or dealer.
Check the pre-fuse. Restore
the pre-fuse to its initial
state or replace it. Deter-
mine whether other de-
vices are connected to this
fuse.
