Mahlkonig K30 TWIN, Original Instruction Manual

Page: 14 / 36

If the portafi lter support does not fi t, contact your supplier
(see chapter “Service”).
6. Hold the portafi lter support in posi on and fi x it by turning the screws
clockwise for adjus ng the portafi lter support (le and right) un l ght
using the Allen key (short, 3 mm).
7. Repeat steps 2–5 to adjust the second portafi lter support.
Opera on
INFORMATION!
Danger of overhea ng!
Exceeding the maximum permissible opera ng cycle can cause the
grinder to overheat.
– Do not exceed the maximum opera ng cycle
(see chapter “Technical data”).
– Observe the recommended pause when the maximum permissi-
ble opera ng cycle is reached (see chapter
“
Technical data
”
).
• The grinder has two fuses that act as an overcurrent
protec on device. If this overcurrent protec on device is
triggered because of electric overload, the grinder’s circuit is
interrupted.
• To be able to operate the grinder once again a er triggering
the overcurrent protec on device, switch the On/Off switch
(19) to “0” (off ) and contact an authorized service partner
(see chapter “Service”).
• The grinder also has a motor protector, which switches off the
grinder when the motor becomes too hot. As soon as the mo-
tor has cooled down, the grinder can be put into opera on
again (see chapter “Troubleshoo ng”).