Mahlkonig K30 TWIN, Original Instruction Manual

Page: 12 / 36

Before using
Checking grinder and scope of delivery
INFORMATION!
Risk of damage!
The grinder can become damaged if the packaging is opened carelessly
with a sharp knife or other pointed object.
– Be very careful when opening.
1. Remove the grinder from its packaging.
2. Check if the delivery is complete (see
Fig. A and B ).
3. Check if the grinder or any of the individual parts are damaged.
If this is the case, do not use the grinder. Contact your supplier (see
chapter “Service”).
Se ng up the grinder and inser ng the bean container
1. Place the grinder on a level and stable surface that does not vibrate to
prevent it from falling off .
2. Make sure that the rubber ring has been properly posi oned between
the hopper (1) and hopper intake (17) .
3. Keep pressing the grind adjustment-lock (6) forward and set the grind
adjustment to the fi nest level (scale value “0”).
The locking mechanism can become damaged if you turn the
grind adjustment with force without holding down the grind
adjustment-lock at the same me.
4. Place the hopper onto the hopper intake
5. In doing so, make sure that the pins in the hopper intake catch the corre-
sponding grooves on the hopper and the recess for the lock screw (2) on
the hopper intake aligns in the direc on of the lock screw on the hopper.
6. Keep pressing down lightly on the bean container and turn the bean con-
tainer clockwise so that it clicks into the bean container intake.
7. Use the Allen key (long, 2 mm) supplied to screw the lock screw (24) for
the hopper.
8. Repeat steps 4–7 to insert the second bean container into the remaining