![background image](http://html1.mh-extra.com/html/mahle/air-nex-9380/air-nex-9380_service-manual_3683611013.webp)
| AIR-NEX 9380/9480 | 13 en
© MAHLE
After filling, close the bottle and place it back in its seat.
7.5
UV dye bottle filling
The UV Dye is a substance made up of a yellow-green
coloured fluorescent pigment, which means that, when lit by
an ultraviolet lamp, it becomes fluorescent and thus visible.
The UV dye can therefore be used to detect leaks of a small
entity inside the auto vehicle A/C system.
To fill the UV dye bottle (Fig.1 Pos. 9) it has to be extracted
from its housing by means of the quick coupler on the top
of the bottle; slightly press downward the coupler ring nut
to extract it.
standard UV Dye UV Dye for Hybrid
Note UV Dye for Hybrid bottle – for use with electric
compressor A/C system
Fill the bottle by paying special attention to the “oil care”
system.
•
During the oil suction phase, before entering the bottle
air is made dry as it passes through a path of special
“desiccant” material.
•
The air inside the bottle is therefore completely “dry”
After filling, close the bottle and place it back in its seat.
Summary of Contents for AIR-NEX 9380
