© Copyright Mahindra and Mahindra Ltd. 062016
7-13
7.10 Warning Lamps in the Instrument Cluster
OBD Check Lamp (BSIV only)
The OBD check lamp illuminates when the ignition is
switched ON and remains ON till the engine is
started indicating normal status. If the lamp remains
ON, it indicates a potential engine malfunction.
There may be a malfunction in:
•
The fuel management system
•
The emission control system
•
Systems which affect emissions
Such malfunctions may result in excessive emissions. Contact an
Authorized Mahindra Dealer immediately.
Turn Indicators
The turn lamp arrows in the instrument cluster flash
showing the direction indicated by the turn signals. A
sudden increase in the rate of flashing indicates failure of one or
more of the lamp bulbs. Have them replaced as soon as possible.
Head Lamp High Beam Lamp
The head lamp high beam lamp illuminates whenever
the head lamps are switched ON to high beam or
when the head lamp flash is used.
Check Engine Lamp
ENGINE !
The check engine lamp illuminates when the ignition
is switched ON and goes out in 2 seconds indicating
normal status. The lamp blinks or illuminates
continuously if there is a fault in the engine management system.
Contact the nearest Mahindra dealer for necessary repairs.
Parking Brake/Low Brake Fluid Lamp
The lamp illuminates when:
•
Parking brake is engaged
•
Brake fluid level is low
If the lamp illuminates while driving, do the following:
•
Check if the parking brake is engaged. If yes, disengage it
•
Check if brake fluid level is low. If yes, top-up brake fluid (DOT 3)
to the required level
If the brake lamp still continues to illuminate, immediately get the
vehicle checked at an Authorized Mahindra Dealer.
Clean the top of the brake fluid reservoir before removing the
cap. Make sure no dirt, impurities or other items fall into the
reservoir. Do not leave the cap off for more than a few minutes.
Any contaminants, impurities or moisture in the brake fluid can
affect brake operation, resulting in an accident.
FEATURES AND CONTROL
