Mahindra 3535, Operator'S Manual

Page: 35 / 108

35 Series-HST, Model - 3535, 4035, 4535 & 5035
34
Instrument Cluster
Turn Indicators (LH/RH)
LH and RH turn indicator is provided to indicate the
direction of turning.
A blinking turn indicator implies that either LH Turn Signal
or RH Turn Signal indicator of tractor is ON.
High Beam Indicator
It glows when Head Lamps are operated in High Beam.
Heater Indicator
When the key is turned to 2nd position, the Heater
Indicator glows to indicate the activation of heater element
provided in engine's intake manifold. The indicator
continues to glow for approx. 42 seconds. A timer controls
this time.
1. Turn the key to "ON" position and hold it till the heater
indicator is put-off.
2. Crank the engine when the heater indicator light is put
off after approx. 42 seconds.
Parking Brake Indicator
It glows when parking brake or foot brake pedals
(latched together) is applied.
4WD Indicator
It glows when 4WD is engaged.
Battery Charging Indicator
This indicator will glow if battery is not getting charged.
Once the engine is running, this indicator should go OFF, if
the Battery is getting charged. If the indicator glows
continuously even when the engine is running above low
idle rpm of the engine, the cause should be investigated to
prevent complete discharge of battery and possible damage
of alternator.
Voltmeter
This gauge indicates the battery voltage at all times.
Engine Low Oil Pressure Gauge
This gauge will be in RED Zone if Engine lubricating oil
pressure is less while engine is operating. The pointer will
be in GREEN Zone when pressure is Okay. After putting
ignition switch in "ON" position, the oil pressure gauge
pointer should be in RED Zone. When the Engine is running
and healthy it should be in GREEN Zone. If the pointer is in
RED Zone, the problem should be eliminated before
starting the engine.