Mahindra 3535, Operator'S Manual

Page: 17 / 108

16
35 Series-HST, Model - 3535, 4035, 4535 & 5035
General Construction
The Engine, Front housing, Transmission housing
and semi chassis are bolted together to form a rigid
unit.
Engine
The 35 Series Tractors are fitted with fuel efficient US
EPA (Comply with US Tier-IV emission norms) certified
Mahindra CE series Engines. These are 3/4 cylinder,
Naturally aspirated, Water cooled, Direct Injection
type, comprising rotary fuel injection pump.
Front Axle & Wheels
Front Axle is offset type live front axle with bevel gear
reduction. The front wheels are directly mounted on
wheel hub of front axle. Front track is adjustable with
adjustment provided on rims. Turning angles are all
preset.
Power Steering
The Power Steering system consists of a Hydrostatic
Steering unit (HSU), Hydraulic cylinder. A separate
pump is mounted on the engine front which supplies
oil to this system. Oil for Steering system is common
with Transmission-Hydraulic oil.
Transmission
The transmission is a combination of a hydrostatic
unit (HST) and mechanical gear box. Forward-Reverse
and speed selection is provided by the HST unit and
high-low-medium selection provided by range
section.
Rear Axle & Wheels
The rear axle is mounted on bearings and is enclosed
in a removable housing which is bolted to the
transmission case. The rear wheels are bolted to the
outer flange of the rear axle. The rear track
adjustment is provided on the rear wheel rim.
General Description
Oil immersed Disc Brakes
The tractor is fitted with Oil immersed disc brakes
with 4 discs on each side of the tractor.
Hydraulic System
The tractor is fitted with fully “live” Hydraulic System
using a pump driven directly from the Engine. It is
able to operate the three-point linkage or auxiliary
valve and also operating the power take-off. The Oil
reservoir is common with that of transmission.
Three Point Linkage
Three Point Linkage is suitable for category - I
implements. For ease of implement attachment, a slip
end is provided which can be extended while
implement hitching. For implement with Cat - I
configuration having Cat - II size pin, top link has
both Cat - I & Cat - II holes. For Cat - II on lower link,
slip ends with Cat - II balls are available as spares.
Electrical System
A 12 Volt lead acid battery is used to crank the engine
with the starter motor. The electrical system
comprises of head lamps, plow lamp, brake lights,
parking lamps, instrument cluster, alternator, fuse
box, relays and wiring harness.
Safety
Neutral switch is provided on the Forward / Reverse
pedal linkage system.
Sheet Metal
Hood, side panels, front grille & panel, fenders,
platform and bracketaries are constructed from sheet
metal. Steering top covers, Scuttle bottom and scuttle
top cover are made from plastic.