12
MMS2000C
EN
5.
CARE AND MAINTENANCE
Pull out the power cable from the socket before every maintenance and troubleshooting. The
device is almost maintenancefree.
It is necessary to check feeding wheel, pressure roller and inflow nozzle regularly, if there is
not some dirt. If it is, you have to clean it out.
Please, change the contact tip on the torch regulary
The complete set of pressure hoses should be cleaned up from time to time, because of em-
bedded dust and parts.
The contact nozzle of the torch is wearing up subsequently. When the hole in the nozzle is too
large, it is necessary to change the nozzle. The metal drops are embedding in the inner walls
of the torch cover. Take them out if necessary. The separator is helpful and it is also
a prevention against the firm caking of the drops.
You have to change the damaged cables at once.
5.1.
Disposal of the machine
Do not dispose of electrical equipment together with the normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic Equipment and its implementation in accordance
with national law, electrical equipment that has reached end of its life must be collected separately and returned to an environmentally
compatible recycling facility.
