Mahe MMS2000, Manual

Page: 20 / 36

2 MMS2000C
EN
7.1.4. CuSi welding wire .............................................................................................. 14
7.2. Average shielding gas consumption for MIG / MAG welding ................................... 14
8. TROUBLESHOOTING .................................................................................................. 15
1.
PREFACE
Dear customer!
Congratulation to purchasing of this quality inverter welding machine. Please read whole
Operation manual before you start.
NOTE! Items in the manual that require particular attention in order to minimise
damage and personal harm are indicated with this symbol. Read these sections
carefully and follow their instructions.
1.1. Product introduction
MMS2000C welding machine is portable, lightweight MIG-MAG welding inverter. Its excellent
welding and brazing characteristic enables to use this device for construction work and outdoor
repairs.
Be aware of danger resulted from welding and follow the safety and fire
instructions.
It is necessary to keep the device on a dry place, to protect device against
moisture. It is not advisable to use the device on the open air during rain.
1.2. Assembly requirements
It is necessary to set the device for welding in protection atmosphere on a dry place with the
sufficient area for cooling. The device is designed for use in covered area (under roof).
Never use the device in the rain.