MAHA ZW 500, Operating Instructions Manual

Page: 25 / 30

25
BA060801-en
The following variables can be set:
Variable Designation Description Default Unit
1 Single step RPM Increment of the RPM 1
(1...2000) min
-1
2 Single step Trq Increment of the power take-off torque 1
(1...9999) Nm
3 Warm-up
performance Warm-up performance standard value 20
(1...9999) kW
4 Vehicle data entry Activation or deactivation of the vehicle
data entry and the print out
1 = Make
2 = Model
4 = Operating hours
8 = Customer name
The setting is generated by adding up
the desired digits.
e.g.: Print model and customer name:
Variable value is 10 = 2 + 8
15
(0…15)
5 Autom. printout 0 = No print out is done during the
measurement. The print out is created
using the print out menu <F2> .
1 = A print out is created during the
measurement. A copy can be created in
the print out menu <F2>
1
(0...1)
6 Switchover PS/kW Switchover via software by pressing
<P> key in the measurement menu.
0
(0...1)
10 Pulses per litre Resolution of the consumption meter.
The number of pulses per litre of the
consumption meter are given. 2000
(1...9999) pulses/l
11 Consumption
measurement time Measurement interval of the
consumption measurement with
constant RPM or constant torque. 5,00
(0,01...
99.99) s
12 Consumption
measurement
delay Time delay until the consumption
values are recorded. Is added to
holding time with discrete
measurement. 0,00
(0…99.99) s
13 Stamp size Number of empty lines at the end of a
print out to use a stamp 5
(0…99) Lines
14 Switch-off time Time after which the hand terminal
switches off automatically. The switch-
off time is reset if any key is pressed or
an RPM is recognized. 20
(0…999) Minutes
15 Radio channel Radio channel of the radio transmission
module
0 = Data transmission per cable
1-3= Radio transmission 2
(0…3) Channel
no.