12
BA315001-en
4
Description of the Unit
λ
With the MET 6.x the following exhaust components can be measured almost
simultaneously:
CO in % vol.
MET 6.1 / 6.3
CO2 in % vol.
MET 6.1 / 6.3
HC in ppm
MET 6.1 / 6.3
O2 in % vol.
MET 6.1 / 6.3
Opacity in %
MET 6.2 / 6.3
The following values are also calculated:
λ
MET 6.1 / 6.3
CO corrected in % vol.
MET 6.1 / 6.3
Opacity coefficient in m
-1
MET 6.1 / 6.3
Soot mass concentration in mg/m
3
MET 6.2 / 6.3
The unit has a display and a keypad, where approvals allow. With the exception of
calibration, all inputs needed for operation can be entered via the keypad.
To ensure that any official exhaust emission inspection that is performed is
compliant with legal regulations, the unit must be operated via a PC with the
corresponding MAHA Emission Software (MES). In such a case, the MET is
operated from the PC. The software components for specific countries are
described in separate operating instructions.
In this operating manual, instructions are always given for both operating options,
as applicable:
MES: describes settings applied via the MAHA Emission Software running on the
connected computer.
Display: describes settings applied directly via the MET's input keys.
