MAHA MA STAR 5.5, Original Operating Instructions

Page: 29 / 35

BA364601-en
29
4.4.3 Lowering Process and CE Stop
•
Before lowering the vehicle, remove tools, support stands or similar obsta-
cles from the working area of the lift.
The operator is responsible for ensuring that nobody is within the danger ar-
ea.
• Press and hold the lit DOWN button until the desired lifting height is reached.
•
The lift automatically stops when it has reached the CE-defined stop height.
•
For full lowering back to the initial position, release the DOWN button
after reaching the CE stop and press it again.
•
UP and DOWN buttons are lit. A signal sound is activated when lower-
ing within the CE-defined height range.
4.5 Vehicle in Raised Position
WARNING
When installing or removing heavy vehicle parts, ensure that the centre of
gravity does not shift to a dangerous extent! The vehicle may tip off the lift.
Secure vehicle by lashing it to the support arms with straps.
4.6 Driving off the Lift and Changeover
•
After the lift has been lowered completely, turn the support arms out to the
side and bring them back into starting position.
•
Then drive the vehicle off the lift.
NOTICE
There is a risk of damage to the toothed segments and their function if the
support arms come into contact with the wheels or other vehicle parts!