MAHA LPS 3000, Operating Instructions Manual, Page: 98 / 115

98
BA052301-en
Print out setting
Up to six measurement values can be selected which appear as curves on the print out.
1 Select the measurement values to be
displayed from the list. Enter the
appropriate measurement range.
2 Enter the time period for the graphic
recording.
Selection list of the measurement values:
- Speed
- RPM
-Traction
- Power
- Speed FA
- Speed RA
- Traction FA
- Traction RA
- Power FA
- Power RA
- Acceleration
- Air pressure
- Intake air temperature
- Fuel temperature
- Ambient temperature
- Oil temperature
- Humidity
- CO
- CO
2
- HC
- O
2
- NO
- Lambda (Emission tester)
- Turbidity
- k-value
- Fuel quantity
- l/100 km
- l/h
- Injection quantity
- Average consumption
- Coolant temperature
- Ignition point
- Fuel pressure
- Suction pipe pressure
- Air quantity throughput flow
- Throttle valve position
- OBD Lambda (from vehicle)
- ISE
- Travel distance
- Speed
- Simulated inertia
- Simulation target value
- Simulation actual value
- Simulation error
- Positive simulation
- Negative simulation
- Max. pos. simulation
- Max. neg. simulation
- Force on vehicle
- Vehicle energy
- Energy from vehicle
- Energy from vehicle
- Road Load
- Total speed
- Angle (FA)
- Angle (RA)
-
Temperature 1…8
- Pressure 1…8
- Analog 1…8
The measurement value can only be displayed when the appropriate sensors and measurement
devices are connected.
In connection with the analog input module (optional), Analog 1
… 8 are overwritten with the
given designation from the external measurement data of the configuration.
Store Profile
1 Enter the name of the profile in the first line of the screen.
2 Press the button <F8 STORE>.